[. . . ] Áご愛用いただきますようお願い申し上げます。 Thank you for selecting the DEAGAN chimes. [. . . ] Fully loosen screws B and insert the end of the side column pipe with the small hole on its side, all the way into the left and right side base sections. * To make attachment of the damper and hanger sections easier, do not tighten screws B yet. Fully loosen screws C and slide the damper onto the side columns from above so that the damper rod is positioned on the right. Slide the damper down the columns until it comes to rest on the damper rests. * To make attachment of the hanger section easier, do not tighten screws C yet. 6 ダンパーペダルをセットします。 ダンパーペダルを手前に引き出し、プルロッド ( 上 ) の フック部分をダンパーロッドに引っ掛けます。このと きプルロッドノブを一旦押し下げた状態で引っ掛け、 その後プルロッドノブを離します。 * ダンパーペダルは踏まないでください。ダンパーがか かり、サウンドコラムがセットできなくなります。 Tighten screws B and C. Firmly tighten screws B and C on both right and left sides and secure. Pull the damper pedal out to the front, and then hook the hook on the end of the pull rod onto the damper rod. [. . . ] したら、ネジ D を めて固定します。ペダルを踏み込ん で止まる位置が床面より少し浮いた状態が最適です。 D ダンパーペダル Damper Pedal 分解する場合は、組み立てる時と反対の手順で行 ないます。 Disassembly is performed simply by reversing the assembly order. [. . . ]